WEG Legacy Inverters
CFW10
The CFW10 frequency inverter is an easy and optimized resource for quick installation, programming and operating, covering power levels from 0.18 to 4 kW (0.25 to 5 HP).
Please note: This inverter is now classed by WEG as a legacy product, but Westin Drives will continue to support and upgrade it.
Characteristics:
Display readings: motor speed, frequency, voltage, current, last fault, heatsink temperature and drive status.
Please note: This inverter is now classed by WEG as a legacy product, but Westin Drives will continue to support and upgrade it.
Characteristics:
- Single-phase and three-phase
- Scalar control (V/F)
- 150% current overload capacity
- DSP (Digital Signal Processor) controlled PWM output
- 2.5 - 15 kHz adjustable switching frequency
- IP20 protection degree
- 4 isolated programmable digital inputs
- Programmable relay output
- Isolated programmable analog input
- Rheostatic IGBT braking (chopper)
- Ambient conditions -10 ºC to 50 ºC (14 °F to 122 °F), 1,000 m (3,280 ft) and 90% of humidity without condensation
- All the electronic boards are conformally coated classified as 3C2 according to IEC 60721-3-3 standard
- Motor and VSD protections: overcurrent, motor overload,drive overtemperature, output short circuit, DC link over and undervoltage, and external fault.
Display readings: motor speed, frequency, voltage, current, last fault, heatsink temperature and drive status.
|
Applications:
|
Centrifugal pumps, Processing pumps, Fans / exhaust fans, Stirrers / mixers, Extruding machines Roller tables, DryersRotating filters
Cutting machines
Conveyors
Cutting machines
Conveyors
CFW700
The CFW700, based on the CFW11 platform, is designed and optimised for variable torque applications such as pumps and fans. It comes equipped with a numeric LCD display capable of providing readings for programming, guiding start-up, and troubleshooting.
Please note: This inverter is now classed by WEG as a legacy product, but Westin Drives will continue to support and upgrade it.
Characteristics
Please note: This inverter is now classed by WEG as a legacy product, but Westin Drives will continue to support and upgrade it.
Characteristics
- Simplicity – same programming as all other WEG drives
- Dual DC Bus chokes (6%) for longer VFD lifetime, reduces harmonics eliminating need for external line reactors
- 24VDC Power Supply for process transducers - Standard
- Soft-PLC with free programming software
- Encoder Input - Standard
- RS-485 Modbus RTU - Standard
- Conformal Coated boards for harsh industrial environments
- Rated 50 °C (122 °F) – up to 60 °C (140 °F) with derating
- Self-tuning function automatically matches VFD with motor
- UL, cUL, CE, C-Tick, GOST, IRAM, INMETRO approved
